How to Create a Pop Filter for a Microphone
- 1
Pantyhose
Cut off one leg of the pantyhose. - 2
Embroidery hoop
Open the embroidery hoop slightly. - 3
Pantyhose inside embroidery hoop
Stretch the pantyhose and place the pantyhose inside the embroidery hoop; there should be excess pantyhose. - 4). Tighten the embroidery hoop closed.
- 5
Cut off the excess pantyhose around the embroidery hoop. - 1
The edge of the embroidery hoop is going to be placed inside the wooden candle holder. - 2). Use the knife to chisel the hole open just enough so a piece of it will fit snugly.
- 3). Fill the hole with glue.
- 4). Place the embroidery hoop into the hole and let sit for at least 30 minutes.
- 5). Place finished pop screen in front of microphone.
