- 1). Connect both cables from the satellite dish antenna to the "SATELLITE IN 1" and "SATELLITE IN 2" connections on the back of the receiver. As a point of reference, this article refers to the television in the room with the receiver as "TV1" and to the second television that operates remotely in the room without the receiver as "TV2."
- 2). Connect a coax cable from the "TV CH3-4 OUT" connection for TV1 on the back of the receiver to the input connection on the back of the TV1 television.
- 3). Tune the television to Channel 3 or Channel 4. You should see video on the TV1 television screen.
- 4). Connect another coax cable to the "CH21-69 OUT" connection for TV2. The TV2 connections are in a shaded area on the back of the receiver labeled "Home Distribution."
- 5). Run the cable from CH21-69 OUT through the wall, around the baseboard or through the attic, as necessary, to the room where TV2 is located. Connect this end of the cable directly to the input on TV2.
- 6). Tune TV2 to Channel 60. If you do not get a video signal from the receiver, try Channel 72. If you still do not get video, go back to TV1, navigate to the SYSTEM INFO menu screen and check the channel out setting for TV2 in box "J." Exit the menu screens and go back to TV2. Tune TV2 to the channel number indicated on the SYSTEM INFO screen.
- Advertisement -
- Advertisement -