- 1). Mix one part dish washing soap with two parts water inside a spray bottle. This is used to clean the glass surface as well as create a slippery surface for the squeegee to pass over.
- 2). Cut the film in the shape of the curved glass surface with the X-Acto knife. This is done by rolling the film on to the surface and cutting around the surface with the knife. Set each piece aside as you cut the film to ensure matching the cut film to the right piece of glass.
- 3). Spray the glass surface with the dish washing soap mix. Scrape away any residue build up with a razor blade and carefully wipe away the liquid with a sponge.
- 4). Press the tint film onto the surface, beginning at the center and unfolding the film as you work towards the outer edges. Press the film down around the outer edges and smooth the surface with your hand.
- 5). Spray the film with the dish washing soap mixture. This will moisten the surface and aid in working out air bubbles from the tint.
- 6). Hold the squeegee in your writing hand and the blow dryer in your opposite hand. Apply heat to the tint and spread the squeegee over the surface. Work from the center towards the edge in an even and consistent manner until the entire surface is air free.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time