Hard Surfaces

• 1). Pour 1 tsp. of rubbing alcohol onto a sponge.
  
  
• 2). Place the sponge onto the surface containing the fluorescent marker stain, and rub the area gently. Continue rubbing until you have removed the marker stain.
  
  
• 3). Rinse the sponge in clean water, and wipe the surface to remove the alcohol residue.
  
  

Fabric and Clothing

• 1). Spread a layer of paper towels onto a hard, flat surface. Lay the marker-stained fabric on top of the paper towels, with the marker stain facing downward.
  
  
• 2). Pour 1 tsp. of rubbing alcohol onto a sponge, and press the sponge against the fabric so that you moisten the area around the stain, but not the stain itself.
  
  
• 3). Add another 1 tsp. of rubbing alcohol to the sponge, and apply it directly to the stained area.
  
  
• 4). Lift up the fabric, and you will see that the fluorescent marker ink has been transferred to the paper towel. Move the paper towel to a clean section, and lay the fabric back down.
  
  
• 5). Press the sponge against the stain, and continue pressing until you have removed the stain from the fabric.
  
  
• 6). Set a washing machine to the appropriate cycle, based on the fabric, and add the amount of laundry detergent specified by the bottle. Allow the machine to complete the wash cycle.
  
  
• 7). Remove the item from the washer, and check to make sure the fluorescent marker stain is gone. If it is still there, repeat stain removal process, and wash again.
  
  
• 8). Place item in the dryer, or hang it up to air dry.