- 1). Disconnect negative cable from the negative battery terminal. Loosen the retaining nut on the cable clamp and pull the clamp off the terminal.
- 2). Lift the wiper arm off and away from the windshield until the arm locks into a vertical position.
- 3). Loosen and remove the nut holding the wiper arm assembly to the wiper motor.
- 4). Remove the wiper blade arm assembly. Remove the wiper arm gaskets.
- 5). Remove the screws holding the front plastic trim at the base of the windshield to expose the wiper motor and pull off the trim.
- 6). Remove the bolts holding the wiper motor in place and remove the motor.
- 7). Plug the electrical connector to the wiper motor.
- 8). Install the new motor. Installation is the reverse of removal.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time