- 1). Locate the red and black wires protruding from the outer casing of the distributor. Strip a quarter inch of outer insulation from these wires with the wire strippers.
- 2). Twist the stranded wires clockwise to minimize and secure stray wires. Crimp a spade terminal to each wire with the crimp tool.
- 3). Locate the cylindrical ignition coil. Determine the positive and negative polarity on the coil's contacts by examining the embossed indices next to the terminal tabs.
- 4). Push the red wire to the positive conductor on the ignition coil. Do the same for the black negative wire. Wiggle the spades a little to check for a tight fit.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Next Post