- 1). Use a box cutter to cut a hole in the bottom of a plastic storage bin. The hole should be approximately 1 inch smaller than the dryer exhaust hose.
- 2). Insert the dryer exhaust hose through the hole in the storage bin. Pull only 1 inch of the hose into the storage bin.
- 3). Cut three small slits in the end of the dryer exhaust hose, where it enters the inside of the storage bin. Press the resulting tabs flat against the bin and secure them with glue. If necessary, place a heavy object, such as a book, on the tabs while the glue dries.
- 4). Cut a section of floral wire equal to the circumference of the dryer hose, plus 4 inches. Using a leather punch tool, punch two small holes in the storage bin, and feed either end of floral wire into the holes. Twist the wire ends together inside the bin.
- 5). Insert the free end of the dryer exhaust hose through the wire loop under the bin. Fill the bin with packing peanuts, and place it on a shelf above the packing area. When needed, slip the hose out of the wire loop, place it over a shipping container and shake out the peanuts.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Next Post