Things You'll Need

Instructions

1

Open the fuse panel cover on your Sebring by pulling down on the fuse panel cover. Newer model Sebrings have a knob on the fuse panel cover that you need to turn counterclockwise 45 degrees to pull down on the fuse panel.
2

Plug the electrical connector from the OBD scan tool into the fuse panel port made for the tool. There is only one port large enough to accommodate the plug.
3

Turn the ignition key to the "II" position.
4

Read the codes generated by the Chrysler's on-board diagnostic computer.
5

Refer to your Sebring's service manual for the specific code that is displayed on your OBD scan tool. The code displayed on your OBD tool will correspond with a code listed in the technical service manual. The manual will translate the code for you and tell you what needs service.