- The Z115/Model 315 Whirlpool Spa has a light at the base of the spa, which helps you see into the spa at night. The Duplex Control Panel is on the rim of the spa for easier access, and it also has three position control panels around the spa for individual comfort. This whirlpool spa has 12 jets, and it accommodates six to eight people.
- This whirlpool spa features a two-speed, 115-volt combination pump and motor. It has a filter on the front to remove any debris from your spa, and to keep it clean and bacteria-free. The pipes are 3/8 inch in diameter vinyl tubing. The control panel pipes range from 11.5 inches long to 38 inches long, and the suction pipes are between 1 inch and 1 ½ inches in diameter. These pipes are also between 16 and 18 inches long, and use 1 ½ inch diameter connections, ranging in length between 2.5 inches and 3 inches.
- This spa has a wooden frame comprised of four panels and four frames, and it also has four corner posts. You must use drywall screws to attach the frame to your whirlpool spa. You need eight No. 6 or 8 by 2.5 inch long screws, 24 No. 10 by 3.5 inch long screws and 16 No. 6 or 8 by 1.63 long screws.
- Never use a scrubbing brush to clean your Jacuzzi tub. The coarseness of the pad or bristles could damage the spa finish. Also, avoid household cleaners, which can hurt your jets and finish. Always use a whirlpool spa cleaner, and remove the dirt and cleaner residue using a wet cloth. Clean your filter once a month to reduce dirt build-up and to prevent blockages. Replace your filter about once a year.
- Advertisement -
- Advertisement -