Live Chicken Dye

• 1). Mix the nontoxic dye with water and stir until the water is fully colored. Use cups or small bowls for separate colors.
  
  
• 2). Rinse the chickens with distilled water to remove dirt or bacteria. This makes the dye hold better.
  
  
• 3). Dip the chickens into the colored water up to their necks and hold them there for at least five seconds. Remove them from the water and shake them gently to remove excess dye.
  
  
• 4). Daub their heads gently with the paintbrush or sponge. Avoid getting the dye into their eyes or beak because it's uncomfortable even though it's nontoxic.
  
  
• 5). Separate the chick for 15 to 30 minutes, or until dry, then repeat with the other baby chickens.
  
  

Egg Injection

• 1). Clean the eggs, needle and syringe with boiling water or antibacterial soap. The eggs should be within a day or two of hatching so you're essentially just giving the fully-developed chicken a colored bath before it hatches and not dyeing the embryo itself.
  
  
• 2). Draw about one drop (1 ml) of nontoxic dye into your syringe.
  
  
• 3). Insert the needle gently in the top of the egg and depress the plunger slowly to prevent leaking or spilling.
  
  
• 4). Cover the hole with paraffin wax or another nontoxic sealant (duct tape will work) and return the eggs to their nest or the incubator.