Cleaning Bag

• 1). Depress the buttons on each side of the jet sweep assembly to release the bag frame and bag.
  
  
• 2). Turn the bag inside out, then remove the collected debris by picking off the debris by hand, rinsing the bag with the garden hose or lightly brushing it with a towel.
  
  
• 3). Turn the bag right-side out. Open the frame completely, then reinsert it into the jet sweep assembly. Align the buttons, then insert the frame until it clicks in place.
  
  

Quick Disconnect Filter

• 1). Release the quick disconnect fitting mounted on the return line orifice where the Polaris 65 hose connects to the pool filter's return line. Push in on the quick disconnect fitting. Rotate the fitting counter-clockwise, then pull the fitting out of the orifice.
  
  
• 2). Remove the screen filter from inside the quick disconnect fitting. Rinse the filter out to remove the collected debris, then reinsert the filter into the fitting.
  
  
• 3). Reinstall the quick disconnect fitting. Align the groove in the fitting with the tab in the orifice. Insert the quick disconnect fitting while rotating it clockwise until it stops turning. Release the quick disconnect fitting when it seats in the orifice.