- 1). Place the pieces for the bed on the floor. You will have 10 main pieces with two sizes of screws and a cover for each screw.
- 2). Attach the side sections with the wheels to the front section of the train. Insert two smaller screws into a screw cover. Insert a screw into the screw hole near the bottom on the inside of the front section. Use the Phillips head screwdriver to tighten the screws.
- 3). Attach the panels for the cab to the rear of the side sections. Insert screws into a screw cover and insert them into the screw holes. Tighten the screws to secure the panels.
- 4). Set the rear of the train bed in place and tap on the pieces until you hear them snap into place. Place the top of the cab on the panels. Attach the top of the cab with screws and a screw cap.
- 5). Place the face of the train on the front piece and secure it with the longer screws and a screw cover. Set the front piece in place. Secure with screws and a screw cover.
- 6). Attach the lid to the storage container at the front of the bed. Apply the stickers to the face of the train.
- Advertisement -
- Advertisement -