Commercial House Washing
€ First the electric pressure washer should be connected to the electric outlet.
€ At the same time, it should washer should be connected to the faucet which has come alone with the pressure washer package to avoid any irregularities. One should make sure that the nozzle is properly attached.
€ While one is washing the walls of the house, an appropriate distance should be maintained. The distance should be approximately 3 to 4 feet.
€ One should always spray horizontally and the commercial house washing should be started from the bottom.
€ The detergent should not be allowed to sit on the surface for more than 10 minutes.
€ If it is necessary, work should be done in sections. One can alternate between rinsing and cleaning.
€ The procedure of rinsing is opposite. It should begin from the top of the walls.
€ The surface should be sprayed with fresh water, till it gets totally detergent free.
€ One should make sure that the siding area and the gutters are washed properly. Dust on the walls should also be cleaned. One should be very cautious when work is being done around outside lights and windows.
€ If the pressure washing is being done on a wooden surface, the spray gun should not be held directed to one point for a long period. If this is done, the wood can be damaged and dented. One should always remember to move the nozzle at a very steady pace and constantly.
€ On the other hand is one is working on paint removal; the surface can be prepared for a coat of paint.
€ When the walls are being pressure washed, one should work at his own pace. One should also determine the amount of dirt on the surface. Based on this one can decide how slowly or fast one needs to clean the walls.
€ One should always remember to close the windows. The wand should be held at an angle while spraying around the windows.