The answer to the question of whether or not to use a blackhead remover for acne care is yes, and no.
If the device is used properly and kept sanitary, then the answer is yes; otherwise, you could do more harm than good.
A blackhead remover will help you with your acne care.
Do Not Dig at Your Face We have all seen the blackheads and we all want them out of our face as fast as possible, so finding a blackhead remover for your acne care is very important.
Digging at your face with your fingers and nails is very unsanitary and can cause further eruptions from the bacteria and aggravate the eruptions you open up.
The ones you pick with your hands and nails can become infected, leaving a large scarred area on your face.
A blackhead remover for your acne care can help with this.
Surgical Steel is Safest Blackheads appear on your chest, back, arms and neck at times as well.
The blackheads are the clogged pores that have turned dark when the oxygen hits the surface of the thick oil deposit in the pore.
Devices to remove the blackheads are available and you want to make sure you purchase one that is made of surgical steel.
This can be sanitized after each use and will not become corroded with rust, making a stainless steel blackhead remover the safest tool for this purpose.
Moist Towel Application Prior to using a blackhead removal device you should lay a hot, moist towel on your face for seven to ten minutes.
This will open up the pores and make the extraction of the blackhead much easier and less painful.
Use a mild antibacterial soap to cleanse the surface of the skin so that bacteria will not travel to the newly opened pore.
The type of blackhead remover that is usually recommended is called a comedone extractor.
Each end is a different size with a small hole in the center.
The blackhead is centered in the hole while you gently push on the tool.
The blackhead will escape as the pressure is applied.
Once you have extracted the blackheads with the blackhead removal tool, again, wash and rinse your face with a gentle antibacterial soap to complete you acne care routine.
Do Not Break the Skin It only stands to reason that you should not push so hard as to break the skin.
If the blackhead will not come out after the initial attempt to get it out, clean the rest of them out of your face and then place a hot moist cloth over the blackhead that would not come out.
Let the moist towel stay there for about seven to ten minutes again.
If the black head does not come out on the second try, leave it alone for a day or so and try it again.
This is an effective way to help your acne care routine.
Slough Off Dead Skin and Use the Blackhead Remover Steaming the face and using a facial scrub that has small, fine grains to make it mildly abrasive will clean the face, slough off the dead skin and remove blackheads.
A small facial buffing pad will help while the gritty facial scrub is being used.
It is like attacking the blackhead on two fronts to remove it and the bacteria it has as well.
This process should be done approximately every two or three days.
The exception to that rule is if you work in an industry that has oils in the air or you work with grease or oils.
If the device is used properly and kept sanitary, then the answer is yes; otherwise, you could do more harm than good.
A blackhead remover will help you with your acne care.
Do Not Dig at Your Face We have all seen the blackheads and we all want them out of our face as fast as possible, so finding a blackhead remover for your acne care is very important.
Digging at your face with your fingers and nails is very unsanitary and can cause further eruptions from the bacteria and aggravate the eruptions you open up.
The ones you pick with your hands and nails can become infected, leaving a large scarred area on your face.
A blackhead remover for your acne care can help with this.
Surgical Steel is Safest Blackheads appear on your chest, back, arms and neck at times as well.
The blackheads are the clogged pores that have turned dark when the oxygen hits the surface of the thick oil deposit in the pore.
Devices to remove the blackheads are available and you want to make sure you purchase one that is made of surgical steel.
This can be sanitized after each use and will not become corroded with rust, making a stainless steel blackhead remover the safest tool for this purpose.
Moist Towel Application Prior to using a blackhead removal device you should lay a hot, moist towel on your face for seven to ten minutes.
This will open up the pores and make the extraction of the blackhead much easier and less painful.
Use a mild antibacterial soap to cleanse the surface of the skin so that bacteria will not travel to the newly opened pore.
The type of blackhead remover that is usually recommended is called a comedone extractor.
Each end is a different size with a small hole in the center.
The blackhead is centered in the hole while you gently push on the tool.
The blackhead will escape as the pressure is applied.
Once you have extracted the blackheads with the blackhead removal tool, again, wash and rinse your face with a gentle antibacterial soap to complete you acne care routine.
Do Not Break the Skin It only stands to reason that you should not push so hard as to break the skin.
If the blackhead will not come out after the initial attempt to get it out, clean the rest of them out of your face and then place a hot moist cloth over the blackhead that would not come out.
Let the moist towel stay there for about seven to ten minutes again.
If the black head does not come out on the second try, leave it alone for a day or so and try it again.
This is an effective way to help your acne care routine.
Slough Off Dead Skin and Use the Blackhead Remover Steaming the face and using a facial scrub that has small, fine grains to make it mildly abrasive will clean the face, slough off the dead skin and remove blackheads.
A small facial buffing pad will help while the gritty facial scrub is being used.
It is like attacking the blackhead on two fronts to remove it and the bacteria it has as well.
This process should be done approximately every two or three days.
The exception to that rule is if you work in an industry that has oils in the air or you work with grease or oils.