Hare Traction Splint Instructions

104 11
    • 1). Check the distal pulse near the heel of the injured leg. Measure the Hare Traction Splint against the patient's uninjured leg and adjust it, so it reaches from the top of the pelvis to several inches past the heel. Lock the splint securely into position and open all the straps.

    • 2). Lay the Hare next to the injured leg and position it, so the top of the splint is at the top of the pelvis, and there are two straps above and below the knee. Apply the ankle hitch by sliding the ankle strap under the patient's heel and crisscrossing the straps, so they form an "X" over the top of the foot. The three "D" rings on the ankle strap should all be together.

    • 3). Grip the patient's foot with both hands, one under the ankle at the heel and the other on top of the foot over the ankle strap. Apply manual traction by gently lifting and pulling the foot towards you. Slowly twist the foot into the correct position if it the toes are not pointing upright. Do not release traction until the Hare is fully applied.

    • 4). Lift the leg high enough that an assistant can slide the Hare into position underneath. Maintain traction of the leg while your assistant firmly positions the top of the Hare against the top of the hip bone. Gently lower the leg into the cradle of the splint (do not let go), so your assistant can secure the pubic strap high up on the thigh.

    • 5). Slide the "D" rings on the ankle strap over the hook on the traction mechanism and tighten the traction strap until the injured leg is approximately the same length as the uninjured leg.

    • 6). Secure the Hare's straps, working from the ankle to the thigh. Do not secure a strap if it is directly over the fracture site and do not secure a strap if it will not fit. Once the straps are secure, the person holding the leg for traction may gently release it.

    • 7). Check the distal pulse again to ensure the straps are not interfering with circulation. Secure the patient and the Hare to a backboard or litter, making sure the splint is supported.

Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.