How to Replace Suspension Springs on a Kenmore Elite Front Load
- 1). Unplug the washer from the wall and pull it out so you have access to the back of the machine.
- 2). Remove the three screws from the top cover at the back of the machine. Pull on the cover and lift up to remove it.
- 3). Remove the screws from the top of the control panel. Pull out the soap dispenser drawer and remove the screw from behind it.
- 4). Open the door of the unit and remove the screws from the door latch.
- 5). Slide a flathead screwdriver between the wire on the front of the machine and the door gasket.
- 6). Remove the four screws from the front of the machine in the door well and remove the front panel.
- 7). Lift up on the washer tub with the help of a partner. Grab the springs with a pair of pliers and pull them off the tub.
- 8). Hook the new springs onto the tub.
- 9). Reassemble the unit.