- 1). Locate the air-conditioner refill port. Follow the tubes leading out of the compressor into the engine bay until you find a small stem protruding from the tube. The stem has a black plastic cap connected to it. Unscrew the cap and place it in a safe location.
- 2). Follow the instructions included with your R-134a recharge kit to prepare it for use. Connect the fill hose to the refill port. The recharge kit's gauge should spike to show the current idle pressure of the system.
- 3). Start the Avalanche's engine and turn the air conditioner on. Check the gauge again. The proper target pressure of your vehicle's air-conditioning system depends on the outside air temperature. The gauge will be marked with several temperatures. When the needle rests on the current temperature, the system is properly charged. If the needle is below the current temperature, the system is low and should be refilled.
- 4). Open the valve on the hose or depress the trigger on the refill canister, depending on what type of refill kit you are using. Pay close attention to the pressure gauge. Continue filling the system with coolant until the needle on the gauge rests on the current outside temperature. Close the valve or release the trigger.
- 5). Disconnect the hose from the refill port and replace the cap. You can save the R-134a canister for future use if it still contains coolant.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time
Prev Post
What Does the History of Cave-In-Rock have in Common with Gathering of the Juggalos and Horror Rap?
Next Post