Depending on what type of project or wiring you are looking to do when it come to home electric, you will want to decide between AC and DC wiring. Here are a few tips to help you to pick which one.
DC wiring is basically just one steady flow in a direction. DC cannot travel as far as AC can and will begin to lose energy pretty quickly. Because of this, you should not use it in bigger projects. While it used to be used to power homes, it is no longer efficient enough.
AC wiring is for continuously switching directions. This is the type you are going to want to use when you are setting up an outlet in your home. AC wiring can carry a lot of energy a pretty far distance, and because of this, power plants will use this wiring when they are using generators. AC is also safer when it is traveling over a longer distance.
No matter which you decide to use for your project, make sure you remember you are working with electricity and that you must shut it off before beginning anything. Taking every precaution is the best advice when it comes to doing any project with wiring or electricity.
Although hiring an electrician to do your home electric connection and wiring may be easiest, you can save time and money installing your own electrical cable. If you have never done a project like this, there are a few basic tips that you should keep in mind. Here are a few things that you will want to consider when installing electrical cable in your home.
The first and most basic rule that you should adhere to is knowing exactly where the electricity is at all times. If you are unsure of what is hot and what is not, you should investigate before you touch the wires. It is much betters to double check everything than to risk serious injury.
If you are wiring a new house, you will not want to hook up the power until everything is in place. This will keep you from hurting anyone during the construction process. If you are in doubt as to whether something is hot, test it out first. This will save you a lot of trouble in the future.
Before you begin, get a drawing and label everything that you are going to do. Plan exactly where you are going to run everything and decide where everything will hook up. You should plan out where all of the circuit breakers will go as well as the outlets. The more circuits that you can put in, the better off you will be in the long run. Make sure that all of your power needs for the foreseeable future are met. Just make sure that you do some kind of planning before you just start putting cable everywhere. It will save you a lot of time if you do not have to go back and do everything over again.
If you are running cable throughout a new construction project, running the cable will be easy. You do not have any walls to contend with and you can run it any direction that you want. If you are running some cables in a house that is already constructed, you may have a bit tougher of a job. You will need to find an access point that allows you to get inside the walls. Most of the time, the best option is to get in the basement or the attic depending on the house. You can then get into the inside of the walls.
With an attic, you are free to run the wires up above the ceiling and then strategically go down through the walls as you need.
DC wiring is basically just one steady flow in a direction. DC cannot travel as far as AC can and will begin to lose energy pretty quickly. Because of this, you should not use it in bigger projects. While it used to be used to power homes, it is no longer efficient enough.
AC wiring is for continuously switching directions. This is the type you are going to want to use when you are setting up an outlet in your home. AC wiring can carry a lot of energy a pretty far distance, and because of this, power plants will use this wiring when they are using generators. AC is also safer when it is traveling over a longer distance.
No matter which you decide to use for your project, make sure you remember you are working with electricity and that you must shut it off before beginning anything. Taking every precaution is the best advice when it comes to doing any project with wiring or electricity.
Although hiring an electrician to do your home electric connection and wiring may be easiest, you can save time and money installing your own electrical cable. If you have never done a project like this, there are a few basic tips that you should keep in mind. Here are a few things that you will want to consider when installing electrical cable in your home.
The first and most basic rule that you should adhere to is knowing exactly where the electricity is at all times. If you are unsure of what is hot and what is not, you should investigate before you touch the wires. It is much betters to double check everything than to risk serious injury.
If you are wiring a new house, you will not want to hook up the power until everything is in place. This will keep you from hurting anyone during the construction process. If you are in doubt as to whether something is hot, test it out first. This will save you a lot of trouble in the future.
Before you begin, get a drawing and label everything that you are going to do. Plan exactly where you are going to run everything and decide where everything will hook up. You should plan out where all of the circuit breakers will go as well as the outlets. The more circuits that you can put in, the better off you will be in the long run. Make sure that all of your power needs for the foreseeable future are met. Just make sure that you do some kind of planning before you just start putting cable everywhere. It will save you a lot of time if you do not have to go back and do everything over again.
If you are running cable throughout a new construction project, running the cable will be easy. You do not have any walls to contend with and you can run it any direction that you want. If you are running some cables in a house that is already constructed, you may have a bit tougher of a job. You will need to find an access point that allows you to get inside the walls. Most of the time, the best option is to get in the basement or the attic depending on the house. You can then get into the inside of the walls.
With an attic, you are free to run the wires up above the ceiling and then strategically go down through the walls as you need.