- 1). Turn the end-cap ring until the arrows are visible in the openings of the end-cap base. The arrows indicate everything is aligned for removal. The end-cap is located where the spa wand meets the handle.
- 2). Pull the handle out of the end-cap ring. This removes the handle and filter screen stored on the end of the handle from the rest of the Polaris Spa Wand. Set the Spa Wand aside.
- 3). Hold the base of the filter screen. Do not touch the screen itself, only the base. Turn the handle clockwise, approximately 1/8th rotation, until it won't turn any farther. Pull the filter off of the handle.
- 4). Shake the filter to remove any debris. Use a hose to remove grime and residue.
- 5). Line up the notches on the filter with the notches on the handle. Push together and then turn the handle 1/8th rotation counterclockwise to lock the filter in the handle. Insert the filter and handle into the Spa Wand. Turn the end-cap ring until no arrows are visible in the openings of the end-cap base. This indicates the unit is locked and ready for use.
- Advertisement -
- Advertisement -