- 1). Remove the straps from the roller skates. Clean and condition the leather by rubbing it with saddle soap, allowing it to absorb into the leather and wiping off the excess.
- 2). Place your normal bicycling shoe on top of the pedal in a natural position. Put the toe of the shoe where it would be if you were actually wearing it while riding.
- 3). Thread the strap through the outer edge of the pedal and then through the inner edge. Buckle the strap using the outermost buckle hole. You now have a doubled strap buckled onto the top of your pedal. Slip the toe of your riding shoe underneath the straps. If the fit is loose, tighten the strap one notch and try again until you find a snug fit that allows you to remove the shoe easily.
- 4). Wrap and buckle the other strap to the other pedal. Remove the shoes until you are ready to ride but leave the straps in place.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time